+49 (0) 721 572900Cross-Shaped Spacers
The product range includes not only pedestals, but also joint crosses in widths of 3, 4, 5, 6, 8 and 10 mm, which can be used individually or in combination with the pedestals.
Cross-shaped / joint spacers can be used allone or in combination with our pedestal systems. For this purpose, a pressure equalization disc (DA200/3) is layed on top of in the PP series to prevent slipping of the joint cross. When combined with height-adjustable stilt bearings, the joint cross can be easily placed.
Joint crosses with set break point
- FK662/3 dimensions: 60x60x20x3 mm 1000 pieces
- FK662/4 dimensions: 60x60x20x4 mm 1000 pieces
- FK662/5 dimensions: 60x60x20x5 mm 900 pieces
- FK662/6 dimensions: 60x60x20x6 mm 750 pieces (on request)
- FK662/8 dimensions: 60x60x20x8 mm 700 pieces
- FK662/10 dimensions: 70x70x30x10 mm 400 pieces
Joint crosses without break point
- FK662/6 dimensions: 60x60x20x6 mm
- Packing quantity: 750 pieces
Special Cross-Shaped Spacer for pedestals of Plattenplatte ® PP-Series
- ST-FK 6 dimensions: 94x94x30x6 mm
- Packing quantity: 500 pieces
- Cross-shaped / joint spacers are specially produced for our PP-Series. The ST-FK 6 fits in the gap between the origin spacers.
Material:
PE (polyethylene)
Durability:
wetherproof, none-aging anddimensionally stable
Compatibility:
no plasticisers, wathsoever, full compatibility with all other building materials, e.g. bitumen, PVC, PIB, ECB, elastomers etc.
Application:
can be used als cross or T-cross (breaking point)
Combination:
can be used additionally with PP155/15, PP155/45, PLV50/75, DA200/3
The FK crossed shaped spacer is laid at the intersection of the joints, the spacers ensure a uniform joint pattern. The joints remain open, so the water can drain under the plate covering. Predetermined breaking points make it easier to split the crosshairs and use them as a T-piece for laying the slab surface in the runner's association or semi-association. The joint crosses can also be used in combination with the pedestals to extend the classic joint from 4 mm to 10 mm. The ST-FK6 plug-in cross joint is designed so that it cannot slip through the rigid pedestals PP155/15 and PP155/45.
